Monolayer Blown Film Plant

HM Mono Layer Blown Film Line, HDPE Mono Layer Blown Film Line, LDPE Mono Layer Blown Film Line, LLDPE Mono Layer Blown Film Line

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Monolayer Blown Film Plant Application

  • Shopping Bags, Grocery Bags, T-Shirt Bags
  • Liners & Lamination film for aluminum foil, jute paper and board
  • Liner for woven sacks, Cans and other industrial needs
  • Refuse Bags, diaper films, packaging of dairy products
  • Green House films, packaging of frozen foods
  • Bags and pouches for fruits, vegetables, groceries, refuse bags etc.
  • Wrappers for food products, laundry
  • Heat Sealed sterilized packages for surgical instruments
  • Health care packaging
  • Garment Bags and fresh producing packaging
  • Courier bags
 

Blown Film Plant Technical Specification

DESCRIPTION UNIT OESBL
650
OESBL
800
OESBL 1000 OESBL 1250 OESBL 1500 OESBL 1700 OESBL
2500
 PROCESSING DATA
 Film Layflat Width Range MM 300-600 350-800 500-1000 650-1250 900-1500 1000-1700 1600-2500
 Film Thickness Range LL/LD/HD MICRON 8-150
MAXIMUM OUTPUT
 LD KG/HR 28-32 65-75 80-100 100-120 100-120 110-130 250-280
 LLD KG/HR 25-28 50-55 70-90 80-100 80-100 90-110 200-240
 HDPE KG/HR 40-45 75-85 100-120 120-140 120-140 130-150 240-260
 EXTRUDER
 No. of Extruders 1 1 1 1 1 1 1
 L/D Ratio 26:1 30:1 30:1 30:1 30:1 30:1 30:1
 Extruder MM 40 50 55 60 60 60 90
 Motor Rating KW 11 30 37 56 56 56 132
 GAUGE RANDOMISATION
 FIXED DIE (OPTION OF ROTARY DIE)
 Die Lip Size For LD/LL MM 150 200 250 300 350 400 600
 Die Lip Size For HDPE MM 90 110 150 175 - - -
 TAKE OFF
 Roller Width MM 750 900 1100 1350 1600 1800 2600
 Main Nip Motor KW 0.75 1.5 1.5 2.21 2.2 3.75 3.75
 SURFACE WINDER
 Type MM SEMI AUTO SEMI AUTO SEMI AUTO SEMI AUTO SEMI AUTO SEMI AUTO SEMI AUTO
 Roller Width MM 750 900 1100 1350 1600 1800 2600
 Additional Nip Motor KW 0.75 1.5 1.5 1.5 1.5 1.5 1.5
 Winder Drive Motor KW 0.75 1.5 1.5 1.5 1.5 1.5 1.5
 Max. Wound Diameter MM 500 600 600 600 600 600 600
 Line Speed MTRS/MIN 8-80 8-80 8-80 8-80 8-80 8-80 8-80
 OPTION OF SINGLE STATION OR DOUBLE STATION
 OPERATING REQUIREMENT
 Total Connected Load For Option 1 KW 30 72 83 112 120 125 210
 Total Space Requiremtn (L X W X H) MTR 5X5X5 11 X4X7.5 11X6X7 14X7X7 14X8X10 15X7X13 22X8X12
NOTE: THE INFORMATION IS PROVIDED FOR THE PURPOSE OF GUIDELINE & INDICATION ONLY AND DOESN'T FORM ANY KIND OF COMMITMENTS.
 
 
 
 

© 2010 oceanextrusions.com All rights reserved.